|
Drop
Front Pew Cushions Measurement Sheet
Length
To
determine the length, using a steel tape measure, measure
along the back of the pew seat from one side of inside end
to the other inside end.
If
the pew has a center divider, measure each section separately
from the pew end to the divider. Record the length to the
nearest one eighth inch.
Width
Measure
from back corner of seat to front edge. Be exact.
Drop
Measure
thickness of seat at front edge.
Contoured
or Flat Seat
Use
a contoured base if cushions are to be left loose or if seat
has extreme contour.
See "Determining the Contour
of the Pew Seat".
Use a flat base if seat is flat or close to flat, or if cushions
are being permanently attached.
|
