|
Pew
Back Cushions Measurement Sheet
Length
To
determine the length, using a steel tape measure, measure
along the back of the pew seat from inside end to inside end.
If
the pew has a center divider, measure each section separately
from the pew end to the divider. Record the length to the
nearest one eighth inch.
Height
Measure
from corner of the seat to the start of the top rail. A groove
will usually indicate where the top rail starts.
Standard
Fabric
Absecon
Mills® Sherpa and Shire Fabrics
Chatham® Congregational Fabrics
Fabric Number: _______
Pew
Back Cushions will be pinned in place or fastened with Velcro.
¾" thick high density foam padding mounted to
¼" plywood base is standard for Atwood-Hamlin
Pew Back Cushions.
A
Welted top edge is optional and highly recommended for a finished
look. Pew Back Cushions work best in conjunction with Atwood-Hamlin
Drop Front seat cushions.
|
