Length

To determine the length, using a steel tape measure, measure along the back of the pew seat from inside end to inside end.

If the pew has a center divider, measure each section separately from the pew end to the divider. Record the length to the nearest one eighth inch.

1. When there is a small radius at the front edge, measure from the back corner of the seat to the start of the radius at the front edge.
2. When there is a large radius at the front edge, measure from the back corner of the seat to half way down the radius at the front edge.
3. Customer advises their preference.

1. 1 ½" thick high density foam padding, plain cushion, no welting on edges.
2. 2" thick high-density foam padding, plain cushion, no welting on edges.
3. 2" thick high-density foam padding with welted edges.

All Reversible Cushions have full-length zippers on back edge.
Tufted buttons are optional.
Fitted ends, Rounded corners, and Mitered cuts are also available.

Standard Fabric

Absecon Mills® Sherpa and Shire Fabrics
Fabric Number: _______